Mountainside Wood Products, LLC

Panel Treatments

1/4" Bead
Dimensions: 1/4" x 3/32"
Standard Spacing: 1-1/2"
3/8" Bead
Dimensions: 3/8" x 3/16"
Standard Spacing: 1-1/2"
1/2" Bead
Dimensions: 1/2" x 5/32"
Standard Spacing: 1-1/2"

1/8" V-Groove
Dimensions: 7/16" x 3/16"
Standard Spacing: 1-1/2"
1/4" V-Groove
Dimensions: 7/16" x 3/16"
Standard Spacing: 1-1/2"

3/8" V-Groove
Dimensions: 7/16" x 3/16"
Standard Spacing: 1-1/2"

Appliance Panel Options


Appliance Panel/
Glue-In Strip
-Most door edges available.
-1/4" strip applied flush to back
-Standard reveal protrudes 1/2". on all sides but may be changed
-Hardware clearance should be considered when determining reveal size
‚Äč.

 
Appliance Slot
-Most door edges available
-Slot length is 1/2".









 
Appliance Panel/
Plywood Sheet
-Most door edges available.
-1/4" plywood applied to back.
-Standard reveal protrudes 1/2" on all sides but may be changed.
-Hardware clearance should be considered when determining reveal size.
 
   

Other Door Options

 Corner Pegs
Dimensions:
1/4" x 1/4"
3/8" x 3/8"
1/2" x 1/2"
-Specify peg specie and size.
 
 
 
 
 
35 MM Hinge Holes
-Standard location is 3" but may be changed.
- Option is NOT available on the following edges: E-2, B-Lip, C-Lip, CH-Lip, V-Lip, Square Lip.
 
Hinge Slots
-Standard location is 3" but may be changed.
- Accepts Youngsdale #5 hinge.

 
Finger Pulls
Specify location of pulls:
-Choose edge: Top, Bottom, Left or Right.
-Choose location: For "TOP or BOTTOM" edge, specify left, center or right. For "LEFT or RIGHT" edge, specify top, center or bottom.


 
Prefitted Doors
-Face frame and door/front will have a 3/32" gap around the perimeter.





 
 
Lock Miter
-Can be used to join end panels and face frames or any application requiring a strong, tight joint.

Mountainside Wood Products • Belleville, Pa • 717-935-5753  © 2018